Go straight to the page content
Blackburn Guttering home
It may be dry in Blackburn today but get your broken gutters fixed before the next downpour.
Split joint in a white uPVC gutter with water dripping from the crackBefore
The same white gutter with a new joint fitted and no water leakingAfter
Example photos of a gutter before and after the work.

What is the average price of repairing gutters that are sagging?

In short

Fixing a sagging gutter usually costs from under £100 to a few hundred pounds, depending on the cause. Adding or replacing brackets and resetting the fall is the cheapest fix; repairing rotten fascia boards or replacing damaged gutter lengths costs more.

Updated November 2026

Compare guttering quotes

5 tap-to-answer questions, then your details
1 of 5

What do you need doing?

Your answers will be added to your quote request.

What does a typical sagging gutter repair cost?

A typical sagging gutter repair costs less than many homeowners expect, because the parts are cheap and most of the price is labour and access. National cost guides such as Checkatrade's, updated in May 2026, give these figures, which may not include VAT:

Part of the job Typical price
New support bracket about £10 to £19 each, plus labour
Repairing uPVC gutter about £30 per metre
Replacing one gutter length on a semi £120 to £180
Repairing cast iron gutter £60 to £70 per metre
Gutter specialist day rate about £150 per day

A simple bracket replacement and realignment on a two-storey house often falls at the lower end. Treat these as a guide and compare quotes.

Why does the cause matter so much?

The cause matters because it decides what has to be fixed. If brackets have snapped or are too far apart, new brackets and a reset of the fall solve it. If the gutter is sagging because the fascia board behind is rotten, the board must be repaired or replaced first, which adds cost. If the gutter itself has bent or split under the weight of debris, that section needs replacing.

What else can push the price up?

Other things that push the price up include gutters above two storeys, poor access over conservatories or extensions, cast iron gutters, which are heavy and need two people, and old profiles where matching parts are hard to find. A gutter that has sagged because it's blocked will need cleaning too.

Can sagging be fixed without replacing the gutter?

Sagging can usually be fixed without replacing the gutter. For more detail, see whether it's possible to fix sagging guttering without a full replacement.

Why is it worth fixing sagging quickly?

It's worth fixing sagging quickly because water collects in the dip, adding weight and pulling more brackets loose. Water also spills over the low point onto the same patch of wall, causing damp. In wet weather like Blackburn's, a small sag can become a gutter coming off the wall in a single winter.

How can you get an accurate price?

You can get an accurate price by telling contractors how long the sagging section is, how high it is and what the gutter is made of. A photo from the ground showing the sag and the fascia behind it helps them work out the likely cause.

Gutters need attention?

Describe the job in about a minute and compare local quotes.

Start my request